4. MENU FUNCTION
DXC-C33/C33P Product Information Manual
–
11
• DETAIL Enables or disables adjustment of
sharpness of the image outline
• LEVEL Adjusts the sharpness of the image outline
• FREQUENCY Adjusts the sharpness of the detailed image
outline
• LINEAR MATRIX Enables or disables processing of a color
matrix
• MODE Finely adjusts the color tone
• TARGET COLOR Specifies the color for DETAIL or LINEAR
MATRIX adjustments
• BAUD RATE Selects the baud rate
• D-SUB SYNC Switches the sync signal from the D-sub 9-pin
• RGB SYNC Adds a sync signal to the RGB output
•
EXT SYNC
Switches the input and output of the EXT SYNC (HD,
VD/SYNC) jack and selects the output signal
• H.PHASE Adjusts the horizontal phase when using the camera with
the external sync signal
•
SC.PHASE ROUGH
Roughly adjusts the subcarrier phase when using the
camera with the external sync signal
• SC.PHASE FINE Finely adjusts the subcarrier phase
• FILE SELECT Selects the file into which you store the setting
• LOAD Selects the type of setting to be stored, and loads it
• CCD MODE Selects the CCD read-out mode
• SHADING COMP. Eliminates color at the top and bottom of the screen
• LEVEL Adjusts the SHADING COMP. level
• FS/TRIG IN Selects the input signal from the FS/TRIG IN connector
• NEGA Reverses the output image to negative
•
FLICKER CANCELLER
Reduces flicker when SHUTTER is set to CCD IRIS or
OFF
<ENHANCER> [A]
>DETAIL ALL
LEVEL ± 0
FREQUENCY MID
LINEAR MATRIX ALL
MODE STANDARD
Select Back
<GENERAL> [A]
>CCD MODE FIELD
SHADING COMP. OFF
FS/TRIG IN OFF
NEGA OFF
FLICKER CANCELLER OFF
Select Back
<SYSTEM> [A]
>BAUD RATE 9600
D-SUB VIDEO VBS
D-SUB SYNC C.SYNC
RGB SYNC G
EXT SYNC IN
Select Back
<SCENE FILE> [A]
>FILE SELECT A
LOAD
Select Back
DXC_C33_C33P.qxd 02.2.8 6:03 PM Page 11
