Hookups
33
ql Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
w; Press X/x to select the item.
wa Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 75).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 24 to 27
( through ). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 75 for using the Setup Display.
Audio Connection (pages 24 to 27)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 81).
Enjoying the surround sound effects
Item You select Page
DISTANCE
BALANCE
LEVEL
Set according to the connected
speakers
84
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
p
ENTER
NONE
NONE
YES
LARGE(REAR)
B D
A
B-1
continued
