32
Audio connection (pages 24 to 27)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 93).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 93).
• Set “DIGITAL OUT” to “ON” (page 93).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 94).
z Hints
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON” (page
92).
• For connections
Set “48kHz/96kHz PCM” to “96kHZ/24bit” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page
93).
• The speaker size settings made in steps 16 to 20
will also apply when a Super Audio CD is played.
To change the settings for Super Audio CDs,
select “SUPER AUDIO CD t” in “SPEAKER
SETUP” and adjust the “SIZE” settings (page 94).
A
B-1
C-1
B-2 C-2 D-2
D-1
B-1 C-1 D-1
B-2 C-2 D-2
