The code number is printed in arc form approximately
5 mm from the centre hole of the disc.
The number will be printed on the read-out side and
can only be seen from the read-out side.
(see drawing below)
Please note that this service may result in slightly longer
turn around time of your DVD-ROM order.
Serialisation Specification:
• Print image: 6 x 9 dot matrix, 3 mm high,
5 characters per 10 mm.
• The series or code number may consist of a maxi-
mum of 28 characters using numbers, letters and
symbols. Of the maximum 28 characters 9 charac-
ters can be changed automatically (e.g. increasing
order of numbers).
• Admissible characters of the series or code
number are: letters ”a-z”, ”A-Z”, numbers ”0-9”
and symbols (selected characters of the
ISO 8859-1 set of characters). In case you
need to use symbols, please get in touch with
our Customer Service.
• It is not possible to underline characters
• A series or code number that changes can only
be printed once on the same disc.
• Due to limitation of space on the disc surface, the
series or code number can be applied in one line
only.
• The selected numbers of a series or code number
can be increased or reduced by any constant
value. Other characters such as letters or symbols
remain unchanged.
• A maximum of 9 characters can be increased or
reduced.
Example:
BCDE123456789
ABC-123456789gh0m
123456789abcdef
00000-123456789-0000000
The numbers 123456789 are the characters that
can be changed.
• Please do not use ”bold” or ”italic” caracters.
Special requests (e.g. printing random numbers
which can be supplied on a DOS compatible 3.5”
floppy disk) should be addressed directly to our
Customer Service department.
4. Lableprinting
