Chapter 6 Maintenance 6-7
6
2 Set the AUDIO IN switches to FRONT.
3 Aim the microphone connected to the MIC IN connector at a
suitable sound source. Check that the level indications for both
channels correspond to the sound level.
3 Testing the manual audio level adjusting functions
1 Set the AUDIO IN switches to FRONT.
2 Set the AUDIO SELECT CH-1/CH-2 switches to MANUAL.
3 Adjust the MIC AUDIO LEVEL control on the front of the
camcorder. Check that the level indications increase as the control is
turned counterclockwise.
4 Testing the earphone and speaker
1 Turn the MONITOR control and check that the speaker volume
changes accordingly.
2 Connect an earphone to the EARPHONE jack. Check that the
speaker sound is cut off and that you can hear the sound from the
microphone in the earphone.
3 Turn the MONITOR control and check that the earphone volume
changes accordingly.
