Dubbing/Editing
98
Dubbing sound to a
recorded tape
You can record additional audio to the
original sound on the tape. You can add
sound to a tape already recorded in the 12-bit
mode without erasing the original sound.
Preparing for audio recording
Record audio in one of the following ways.
• Using the internal microphone (no connection
required).
• Connecting a microphone (optional) to the
MIC FRONT jack. (A)
• Connecting a microphone (optional) to the
Intelligent accessory shoe. (B)
• Connecting an audio device to your camcorder
using an A/V connecting cable. (C)
The audio input to be recorded takes precedence
over others in the order of MIC jack t
Intelligent accessory shoe t A/V jack t
internal microphone.
b Note
• You cannot record additional audio:
– When the tape is recorded in the 16-bit mode.
– When the tape is recorded in the LP mode.
– When your camcorder is connected via the i.LINK
cable.
– On sections of a tape that were recorded with the
4CH MIC REC function.
– On blank sections o81
