A SERVICE OF

logo

Overview
System Configuration
16
Using the HFBK-TS1 HDV Interface Board to Input the Video and Audio
Signals Mixed to the HDV Video Equipment
This system allows you:
To input the video signal of the camera to the HDV video equipment
To input the video signal of the camera and the audio signal via the HFBK-TS1 HDV Interface Board simultaneously
to the HDV video equipment
To perform pan/tilt and zoom operations comfortably using the joystick
System configuration
Notes
You cannot operate pan/tilt and zoom with HDV video equipment connected to the i.LINK (HDV) OUT connector
on the HFBK-TS1 HDV Interface Board. Use the VISCA RS-232C or VISCA RS-422 connectors instead.
Use AUDIO DELAY in the HDV menu of the camera to compensate for the delay between the video signal of the
camera and the audio signal input to the HFBK-TS1 HDV Interface Board (see page 26). The delay is adjustable by
STEP (approx. 24 mS).
,
BRC-H700
Microphone
HD video monitor
RM-BR300 Remote Control Unit
i.Link cable
Video signal
Audio line signal
Remote control (VISCA) signal
Signal flow
Microphone amplifier
HFBK-TS1 HDV
Interface Board
HDV VTR, etc. equipped
with the i.Link connector