A SERVICE OF

logo

54
A
Using a USB Cable
(Requires Windows 98 or Windows 2000 Professional. If you use Windows
2000 Professional, visit http://www.hp.com/cposupport/eschome.html for
more information.)
1
Attach Automatic Two-Sided Printing Module.
a Turn knob on printer’s Rear Access Door
counter-clockwise and remove door.
b Press button on each side of
Automatic Two-Sided Printing Module,
then insert module into back of printer.
2 Plug in Electrical Power Cord.
Do NOT plug in USB cable yet.
3 Load White Paper.
Printable side
USB Cable
970C.book Page 54 Tuesday, February 1, 2000 11:31 PM