19
SmartDisk FireWire CD-R/W User Guide
Introduction
After you install the software and connect the SmartDisk FireWire CD-R/W to your
computer, you can play back and record CDs. This Chapter describes how to:
•
Insert and Eject CDs
•
Play back or read CDs
•
Where to find information on how to record a CD
•
Types of CDs you can use, and
•
How to maintain your CDs.
Inserting and Ejecting CDs
To insert a CD:
1 Press the Eject button located on the front of the drive (see Figure 4 on page
20). The CD tray pops open.
2 Pull out the tray to allow for insertion of the CD.
3 Insert the CD-R, CD-R/W, or CD-ROM so that the CD label is facing upward
and the playable/recordable side is facing downward. Ensure the CD is
snapped in securely.
4 Push in the CD tray so that it closes.
Using SmartDisk FireWire CD-R/W
4
