22
Basic Adjustment Settings (Continued)
AUDIO Adjustments
You can adjust the sound quality to your preference with the
following settings.
Press MENU to display the Menu screen.
Press \/| to select “AUDIO”.
Press '/" to select a specific adjustment item.
AUDIO
SETUP
OPTION
TREBLE [ ]– +
BASS [ ]– +
BALANCE[ ]L R
PC SOUND SELECT
RESET
0
0
0
Press \/| to adjust the item to the desired position.
Press MENU to exit.
A
• The items on the AUDIO menu cannot be set when headphones
are not used and “INPUT4 SELECT” is set to “OUT VAO”.
• When resetting all adjustment items (except for “PC SOUND
SELECT”) to factory preset values, perform the following
procedure.
1 Press '/" to select “RESET” in the AUDIO screen, and press
ENTER.
2 Press '/" to select “YES”, and press ENTER.
3
1
2
Selected item
TREBLE
BASS
BALANCE
\\
\\
\ button
||
||
| button
For weaker treble For stronger treble
For weaker bass For stronger bass
Decrease audio from Decrease audio from
the right speaker the left speaker
4
5
FILM MODE
Automatically detects a film-based source (originally encoded
at 24 frames/second), analyses it, and then recreates each
still film frame for cinematic picture quality.
Repeat steps 1 to 3 of COLOR TEMPERATURE on
page 21.
Press '/" to select “FILM MODE”, and press ENTER.
Press '/" to select “ON”, and press ENTER.
Press MENU to exit.
A
• Set “FILM MODE” to “ON” manually to detect a film-based source
(originally encoded at 24 frames/second) when the input source
has vertical frequency of 60 Hz (e.g. NTSC).
•
“FILM MODE” cannot be set when 480P, 576P, 720P or 1080
I
signal
is received from the COMPONENT terminals.
•
“FILM MODE” cannot be
adjusted when the PC mode is selected
as an input mode.
• Film mode does not work when the input source has vertical
frequency of 50 Hz (e.g. PAL, SECAM).
QUICK SHOOT
Provides sharp pictures suitable for fast moving images such
as a sports program.
Repeat steps 1 to 3 of COLOR TEMPERATURE on
page 21.
Press '/" to select “QUICK SHOOT”, and press ENTER.
Press '/" to select “ON”, and press
ENTER
.
Press MENU to exit.
A
• “QUICK SHOOT” may cause image noise. If this occurs, set the
function to “OFF”.
• “QUICK SHOOT” cannot be adjusted when the PC mode is
selected as an input mode.
4
3
1
4
3
2
1
2
LC-20B8U_E_P19-24.p65 05.2.3, 2:05 PM22
