7-3
CHAPTER7
FINISHER (AR-FN3)
The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and the
second groups copies by original. When an optional finisher (AR-FN3) is installed, copy sets can be automatically
stapled. Unstapled sets or groups of copies can be stacked offset from the previous set or group.
PART NAMES
OPTIONAL EQUIPMENT
Finisher (AR-FN3)
●
The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto A3 (11” x 17”) size paper.
Specifications
Tray capacity Top tray: 500 sheets
Second tray: 500 sheets
Offset tray: 1,500 sheets (A4 (8-1/2” x 11”))
750 sheets (larger than A4
(8-1/2” x 11”))
Paper size Top tray: A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Second tray: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Offset tray: A4 to A3 (8-1/2" x 11" to 11" x 17")
Paper weight Top tray: 52 to 128 g/m
2
, 176 g/m
2
, 200 g/m
2
(14 lbs. to 34 lbs., 47 lbs., 53 lbs.)
Second tray: 64 to 105 g/m
2
(17 lbs. to 28 lbs.)
Offset tray: 64 to 128 g/m
2
(17 lbs. to 34 lbs.)
For paper weighing more than 105 g/m
2
(28 lbs.), A4
(8-1/2" x 11") is the maximum size.
Offset 30 mm (1.2 inch)
Paper size A4, A4R, B4, A3
for stapling (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
Stapling capacity 50 sheets (80 g/m
2
(21 lbs.))
(25 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17")
paper)
Power supply Drawn from the copier
Weight Approx. 52 kg (115 lbs.)
Dimensions 590 mm (W) x 560 mm (D) x 998 mm (H)
(23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H))
Specifications are subject to change for improvement without notice.
Finisher release lever
Top tray
Second tray
(not used in the copy mode)
Stapler unit
Paper transport area cover
Paper feed area cover
Top cover
Offset tray
When copying onto A3 (11" x 17")
size paper, pull out the metal
support located at the tip of the
offset tray.
