3-40
CHAPTER3
9
Press the lower “OK” key.
●
The TEXT STAMP menu will appear again.
10
Select the print direction.
●
If the PAMPHLET COPY function is used with this function, the
portrait orientation ( ) must be selected.
11
Press the upper “OK” key.
12
Make all other desired copier selections and enter the
desired number of copies.
13
Press the START ( ) key.
●
If the document feeder is used, scanning of originals and copying
will start.
●
If the document glass is used, proceed to the next step.
14
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
●
Copying will start at this time.
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the WATERMARK function, select the WATERMARK
function again and press the “CANCEL” key.
DATE
SELECT
STAMP
PRINT
DIRECTION
PAGE
NUMBER
WATERMARK
DATE
SELECT
STAMP
PAGE
NUMBER
WATERMARK
OK
OK
1
2 3
4 5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
SPECIAL FUNCTIONS Text stamp
TEXT STAMP
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO
A4
