Adjustment tips and functions
40
Setting a frequency
bank and a channel
and assigning this
channel a receiving
frequency
̈ Set the desired frequency bank.
̈ Set the desired channel.
̈ Set the desired frequency.
Changing the settings of the guitar tuner
The following settings are available:
̈ Turn the jog dial until the “Tune” menu item appears.
̈ Press the jog dial and keep it pressed until the frequency bank
selection appears.
̈ Press the jog dial.
The channel selection appears.
̈ Press the jog dial.
The frequency selection appears.
̈ Press the jog dial.
Your settings are stored.
You are back to the operating menu.
Set the frequency
bank and the channel
Tune
542.625 MHz
Set the frequency; store
the setting
Tune
Call up “Tune”
(special function)
Advanced Menu
542.625 MHz
Exit
Tune
Sync Settings
“Stored”
B.Ch: U1. 1 B.Ch: U1. 1
542.625 MHz
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Setting Meaning
“Inactive“ The “Guitar Tuner” standard display is deactivated
(see page 25).
“Active“ When selecting the “Guitar Tuner” standard display
(see page 25), the receiver is not muted.
“Audio Mute“ When selecting the “Guitar Tuner” standard display
(see page 25), the receiver is muted.
