LUBRICATION
The following parts should be oiled occasionally with SAE
No. 20 or No. 30 engine oil.
1. Tilt screw threads and pivot nut. (First Clean with
Craftsman Gum & Pitch Remover.)
2. Elevation screw threads and pivot nut. (First Clean with
Craftsman Gum & Pitch Remover.)
3. Cradle bearing points.
4. Bearing points in guard assemblv, miter gauge and rip
fence.
GUARD Q ,__
ITER GUAGE
.=j_l;,
i BEARING POINTS
RECOMMENDED ACCESSORIES
ITEM CAT. NO.
Steel Legs ............................... 9-22235
Steel Stand .............................. 9-22214
Retractable Caster Set ..................... 9-22208
Solid Table Extension ...................... 9-29957
7 In. Molding Head Set ...................... 9-3217
7 In. Molding Head Set ...................... 9-3218
7 In. Molding Head ......................... 9-3214
Molding/Dado Insert for 7 In,
Dia. Molding or Dado Head ................. 9-29997
Work Light ............................... 9-2480
ITEM CAT. NO.
Work Light ............................... 9-2481
7 In. Dia. Adjustable Dado Head .............. 9-3263
7 In. Dia. Dado Head ....................... 9-3257
Sanding Wheel ........................... 9-22723
Miter-Gauge Stop Rods ..................... 9-29924
Miter-Gauge Hold-Down Clamp .............. 9-29928
Taper Jig ................................. 9-3233
Universal Jig .............................. 9-3235
Power Tool Know How Handbooks
Table Saw .............................. 9-2918
33
