Administration Tools
6.
1
6 Administration Tools
This chapter explains how to configure or use the various administration
tools found in SP 3300 Series. The following information is provided:
Maintenance using Internet Services
Enabling Internet Services
1
At a client workstation on the network, launch the Internet Browser.
2
In the URL field, enter http:// followed by the IP Address of the SP
3300 Series. Then select the
[Enter]
key.
Example: If the IP Address is 192.168.100.100, enter the following
in the URL field:
http://192.168.100.100
Checking Printer Status
Use these instructions to check the status of SP 3300 Series, the paper
trays and consumables.
To check the status, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Information
tab.
3
Click
Print Information
in the left frame.
Printing Reports
Use these instructions to print the printer’s reports or to send a test print
file to SP 3300 Series.
To print reports, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Information
tab.
3
Click
Print Information
menu in the left frame. Then click the
appropriate
Print
link to print:
Print Information
• Print Printer Configuration Page
• Print Demo Page
• Print Menu Map
• Print PCL Font List
• Print PS3 Font List
Network Information Page
• Print Network Configuration Page
Making and Changing Network Admin
Password
Use these instructions to change the admin user’s password.
To make admin user’s password settings, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Maintenance
tab.
3
Click
Security
menu in the left frame.
4
Select the checkbox to
Enable Security
for using security.
5
To change the Admin User Password, in the change Admin User
Name and Password area:
Enter the
New
Admin Name
and
Old
Admin Name
.
Enter the
New
Admin Password
and
Old Admin Password
.
6
Click the
Apply
button to implement any changes.
Note
: Click the
Undo
button to cancel any changes made and return to
the previous values.
Upgrading Firmware
Firmware upgrades may supplied on a CD or as a download from the
internet. Use these instructions to install firmware upgrades in SP 3300
Series.
To upgrade the firmware, perform these steps:
1
Enable SP 3300 Series (see “Enabling Internet Services” on
page 6.1).
2
At SP 3300 Series Home Page for SP 3300 Series, select the
Maintenance
tab.
3
Click
Firmware Upgrade
in the left frame.
4
Insert the CD or download the upgrade from the internet.
5
Enter the file name and location or
Browse
to the location and
select the file.
6
Click the
Upgrade
button.
