Setting the BLC (Backlight Compensation)
The Backlight Compensation function helps to make the subject brighter when the subject is
in front of a window or the subject is too dark to distinguish. You can use this function when
using the CAM in situations with bright backgrounds.
1. Slide [Mode Selector] down to turn on the CAM and slide it down again.
◆ The Mode Selection screen appears.
2. Slide the [ ▲/▼] switch to select Photo mode and press the [OK] button.
◆ The Photo Capture screen appears.
3. Press the [Menu] button and slide the [ ▲/▼] switch.
Press the [OK] button after selecting <Settings>.
Notes
✤
If you select <Back> in the menu, the previous menu appears.
✤
Press and hold the [Menu] button in Photo Capture mode, you can move to <Settings> directly.
4. Slide the [ ▲/▼] switch to select <BLC> and press the [OK] button.
◆ On( ): Sets the BLC function.
◆ Off: Cancels the BLC function.
5. Slide the [ ▲/▼] switch to select the desired setting and
press the [OK] button.
6. Press the [Menu] button to finish setting.
◆ < > is displayed.
