English - 16
Adjusting the Picture Settings
Your television has several settings which allow you to control picture quality.
1 Press the MENU ( ) button to display the menu.
2 Press the ▲ or ▼ button to select
Picture
, then press the ENTER ( )
button.
3 Press the ENTER ( ) button twice to select
Mode
.
4 Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options:
Dynamic - Standard - Movie - Custom
5 Press the ▲ or ▼ button to select the option to be adjusted, then press
the ENTER ( ) button.
Available options:
Contrast
-
Brightness
-
Sharpness
-
Colour
-
Tint
(NTSC only)
6 Press the ◄ or ► button to reach the required setting.
7 Press the MENU ( ) button.
8 Press the ▲ or ▼ button to select
Colour Tone
, then press the ENTER
( ) button.
9 Press the ▲ or ▼ button to select the required option, then press the
ENTER ( ) button.
Available options:
Cool2
- Cool1
- Normal
- Warm1
- Warm2
Resetting the Picture Settings to the Factory Defaults
10 Press the ▲ or ▼ button to select
Reset
, then press the ENTER ( )
button.
The previously adjusted settings will be reset to the factory defaults.
11
Press the EXIT ( ) button to exit.
➢
◆ The reset function is set for each picture mode.
◆ The television has an “automatic degaussing” system that is activated if
magnetic interference is present. To degauss the television screen, switch
power off by pressing the “
” button (On/Off) on the front panel. (Refer
to “Automatic Degaussing to Remove Colour Patches” on page 29.)
Contrast
Move Adjust
90
Mode
Mode : Dynamic
Contrast : 90
Brightness : 50
Sharpness : 50
Colour : 50
More
Move Enter Return
T V
Move Enter Return
T V
Mode
More
Colour Tone : Normal
Reset
Move Enter Return
T V
Mode
More
Colour Tone : Normal
Reset
AA68-03784A-X0Eng_UK_VE.indd 16 2006-05-26 ｿﾀﾀ・9:29:37
