52
ENGLISH
Playing back the Tape
Various Functions in PLAYER mode
To view a STILL picture (Playback pause)
- Press (PLAY/STILL) button during playback.
- To resume playback, press (PLAY/STILL) button again.
Note:
Your camcorder will automatically stop if it is left for more
than 5 minutes in STILL mode without operation in order to
prevent tape and head wear.
To locate a scene (picture search)
- Press (FF) or (REW) buttons during playback.
To resume normal playback, release the buttons.
Zero RETURN (VP-W61/W63 only)
✤ The ZERO RETURN function works in STOP of PLAYER mode.
✤ You can Fast Forward or Rewind to 0:00:00 automatically.
1. Set power switch to PLAYER mode.
■ Make sure that STOP is displayed.
2. Press ZERO RETURN button.
■ Z.RETURN should displayed.
■ FF or REW works automatically.
Note:
The ZERO RETURN button does not work when
the TAPE COUNTER reads 0:00:00.
Notes:
■ Set the COUNTER RESET to “C.RESET 0:00:00” in MENU mode at the start of the cassette
or the required sequence.
■ When you wish to find this point on the tape again, press Z.RTN button when playback is stopped.
