3535
ENGLISH
Adjusting the LCD during PLAY
✤ You can adjust the LCD during playback.
✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 32)
The Speaker works in PLAYER mode only.
■
When you use the LCD screen for playback, you will hear recorded sound from the built-in
Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the
volume.
■
A volume level display will appear on the LCD.
Levels may be adjusted between 00 to 19.
■
If you close the LCD while playing, you will not hear sound from the speaker.
Notes
■
When the cable is connected to the Multi-AV jack, you cannot hear sound from the speaker or
adjust the volume.
■
If a cable is connected to the Multi-AV jack, you can hear sound from the speaker when
AV IN/OUT MODE on MENU is set to AV IN or S-VIDEO IN. (VP-D323i/D325i/D327i only)
Basic Recording
Controlling Sound from the Speaker
0 : 2 3 : 4 7
5 5 min
VOL. [ 1 1 ]
1 2 : 0 0
1 0 . J A N . 2 0 0 4
<3-2>
2
3-1
00778F VP-D323(i) UK (28~61) 5/10/04 9:22 AM Page 35
