Basic Recording
✤ The EASY.Q mode works only in Camera mode.
✤ The EASY.Q mode allows a beginner to easily make good recordings.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only)
3. By pressing the EASY.Q button, all functions on the camera will be set to off and the recording
settings will be set to the following basic modes:
■
The word EASY.Q will appear on the LCD screen at the same time.
■
Battery level, recording mode, counter, date/time, and DIS ( ) will be displayed.
However, the Date/Time will only be seen if it has been previously set. (see page 33)
4. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic settings.
5. Press the EASY.Q button again in the STBY mode and then turn the EASY.Q mode off.
■
The EASY.Q function will not turn off while you are recording.
■
The camera will return to the settings that were set prior to activating EASY.Q mode.
[ Notes ]
■
In EASY.Q mode, certain functions are not available, such as Menu, BLC and Manual focus.
If you want to use these functions, you must first turn the EASY.Q mode off.
■
The EASY.Q mode settings are deleted when the Battery pack is removed from the Camcorder and
must be reset when the Battery pack is replaced.
■
Taking a photo image using the PHOTO button while EASY.Q is set, releases DIS function.
■
Digital Zoom, Color Nite or Digital Effect is not available in the EASY.Q mode.
Using EASY.Q Mode (for Beginners)
60min
0:00:10
SP
STBY
4040
ENGLISH
3
1
œ
