Installation and Connection 2-11
1. Plug the power cord into the power terminal on the rear side of the projector.
2-11 Connecting a DVD player/Cable/Satellite Box to HDMI/DVI
1. Connecting using an HDMI/DVI cable
• Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD player/Cable/
Satellite box using an HDMI/DVI cable.
Connecting using an HDMI cable
• Connect the [HDMI 1/DVI IN] or [HDMI IN 2] terminal on the back of the projector and the HDMI output terminal of the DVD
player/Cable/Satellite box using an HDMI cable.
2. When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box.
Using the Projector
1. Turn on the projector and press the [HDMI] button to select <HDMI1> or <HDMI2>.
• This projector does not support sound. (Separate audio system is needed for sound.)
2-12 Connecting a DVD player/Cable/Satellite Box via Component
1. Connect the [COMPONENT IN (Y/P
B
/ P
R
)] input port at the back of the projector to the Component port at the back of the
DVD player/Cable/Satellite box with a Component cable.
2. When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box.
Using the Projector
1. Turn on the projector and press the [COMP] button to select <Component>.
Component Ports are marked as (Y/P
B
/P
R
), (Y, B-Y, R-Y) or (Y, Cb, Cr), depending on the manufacturer.
