CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in a minor or moderate injury.
Leaking, overheating, or burst battery could result in fi re or injury.
– Use battery with the correct specifi cation for the camera.
– Do not short circuit, heat or dispose of battery in fi re.
– Do not short circuit, heat or dispose of battery in fi re.
– Do not insert the battery with the polarities reversed.
– Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a long period
Remove the battery when not planning to use the camera for a long period
Remove the battery when not planning to use the camera for a long period
of time. Battery may leak corrosive electrolyte and permanently damage
of time. Battery may leak corrosive electrolyte and permanently damage
of time. Battery may leak corrosive electrolyte and permanently damage
Do not fi re the fl ash while it is in contact with hands or objects. Do not
Do not fi re the fl ash while it is in contact with hands or objects. Do not
Do not fi re the fl ash while it is in contact with hands or objects. Do not
touch the fl ash after using it continuously. It may cause burns.
touch the fl ash after using it continuously. It may cause burns.
touch the fl ash after using it continuously. It may cause burns.
Do not move the camera while it is switched on when you are using the AC
Do not move the camera while it is switched on when you are using the AC
Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fi re or electric shock.
damage the cords or cables and cause a fi re or electric shock.
damage the cords or cables and cause a fi re or electric shock.
damage the cords or cables and cause a fi re or electric shock.
damage the cords or cables and cause a fi re or electric shock.
damage the cords or cables and cause a fi re or electric shock.
damage the cords or cables and cause a fi re or electric shock.
damage the cords or cables and cause a fi re or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear
image and possibly causing camera malfunction.
Avoid obstructing the lens or the fl ash when you capture an image.
When using this camera in low temperatures, you may experience the
following. These are not camera malfunctions and usually recover at
– It takes longer to turn on the LCD monitor and the colour may differ
– When changing the composition, there may be an after image on the
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
It is highly likely to result in computer malfunctions when the 20 pin
connector is connected to the USB port of a PC. Never connect the 20 pin
connector to USB port of a PC.
007 System chart007 System char
008 Identifi cation of feature
012 Connecting to a power sourc
015 Inserting the memory car
015 Inserting the memory card015 Inserting the memory car
016 Instructions on how to use the
018 When using the camera for the
020 Starting the Recording mod
020 How to use the Auto mod
021 How to use the Program mod
021 How to use the DIS(Digital Image
022 Using the Photo Help guide mod
023 How to use the Portrait mod
023 How to use the Scene mode
024 How to use the Movie clip mod
024 Recording the movie clip without soun
Pausing while recording a movie clip
How to use the Multimedia mod
