Setting Event Recording Properties
You can set each channel’s resolution, quality and IPS for event recordings.
Using the mouse may help easy setup.
Use the up/down buttons (
▲▼
) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
Select <Event>.
Event recording setup window appears.
Use direction buttons (
▲▼_ +
) to move to a desired
item, and select it.
Resolution : Sets the resolution of the recorded screen.
For SHR-7080,7082,7160,7162 models, setting the resolution to
<Full D1(L)> limits the maximum supported channels to 4.
Resolution
Name Resolution Description
CIF(S) NTSC: 352 X 240, PAL: 352 X 288
Samples each half of horizontal and
vertical screen.
Half D1(M) NTSC: 704 X 240, PAL: 704 X 288 Samples half of the horizontal screen.
Full D1(L) NTSC: 704 X 480, PAL: 704 X 576 Samples original screen size.
Record Rate : Image Per Second, means the frames recorded per a second.
Record Quality : Sets the recording quality.
When the Event recording setup is done, press <OK>.
Record Option
You can set the recording to stop or overwrite when the HDD is full.
Using the mouse may help easy setup.
Use the up/down buttons (
▲▼
) in <Record> window to
move to <Record Option>, and press [ENTER] button.
Use direction buttons (
▲▼_ +
) to move to a desired
item, and set the value.
3.
4.
5.
~
`
~
~
6.
3.
4.
CH Resolution
Record Rate
Record Quality
1 Full D1(L)
30ips
Level4
2 Full D1(L)
30ips
Level4
3 Full D1(L)
30ips
Level4
4 Full D1(L)
30ips
Level4
5 Full D1(L)
30ips
Level4
6 Full D1(L)
30ips
Level4
7 Full D1(L)
30ips
Level4
8 Full D1(L)
30ips
Level4
REC Quality & Resolution
Previous/Next Page
OK Cancel
Event
Standard
Record Option
OK Cancel
Disk End Mode Overwrite
Disk End Beep
Auto Delete 1 day
