Changing Your Settings 196
Wi-Fi Direct Settings
You can configure your phone to connect directly with other Wi-Fi
capable devices. This is an easy way to transfer data between
devices. These devices must be enabled for
Wi-Fi direct communication. This connection is direct and not via
a hotspot or WAP.
Note:
Activating this feature will disconnect your current Wi-Fi network
connection.
1. Press ➔ and then tap (
Settings
) ➔
Wireless and network
➔
Wi-Fi Direct settings
.
2. Tap
Wi-Fi Direct
. A check mark displayed next to the
feature indicating it is enabled. Your phone will begin to
search for other devices enabled with Wi-Fi direct
connections.
3. After scan, tap a device name to begin the connection
process to another Wi-Fi Direct compatible device.
Note:
The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
4. Tap
Connect
. The direct connection is then established.
5. When prompted to complete the connection, tap
OK
. The
status field now reads “Connected” and your connected
device is listed within the Wi-Fi Direct devices listing.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
ᮣ
Press ➔ and then tap (
Settings
) ➔
Wireless and network
➔
Bluetooth settings
and tap
Bluetooth
to turn it on.
Note:
Bluetooth must be enabled prior to use.
