SSeettttiinnggss
SIM Lock
When the SIM Lock feature is enabled, your phone
only works with the current SIM.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Disable: you can phone any number.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option is not
displayed.
To change your PIN2, refer to the Change PIN2
menu option (5-3-7) below.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option is not
displayed.
100
SSeettttiinnggss
LCD Menu 5-4
The LCD menu enables you to customise the LCD
display.
Screen Mode
You can select the screen image to be displayed in
idle mode when the flip cover is closed.
Normal Mode
: the LCD displays <
Service provider>
and the current time and date.
Image Display: when the flip cover is closed, the LCD
displays the image selected via the
Select Image
option. When the flip cover is open, the LCD displays
the same information as on the normal screen.
Clock: when the flip cover is closed, the LCD displays
the clock selected via the Select Clock option.
Select Image
This option allows you to select the image to be
displayed when you set the Screen Mode option to
Image Display. You can select one of five images
(Image 1 ~ 5).
LCD Contrast
This option allows you to adjust the contrast of the
LCD screen. Push up to increase or down to
decrease the contrast.
Select IDLE
This option allows you to select the IDLE type to be
displayed, by pushing in the appropriate direction.
Select Clock
This option allows you to select the type of clock to be
displayed in idle mode when the flip cover is closed.
101
