Tools
74
press <Save>. If Daylight Savings Time is applied it is indicated by an icon
at the right side of the scrolling date and time bar.
Stopwatch
The Stopwatch (Menu 7.7) allows you to time an event and measure up to
four sub-intervals, such as lap times. To use the stopwatch:
1. From the Idle screen, press [ ] and select Tools
→ Stopwatch.
2. Press [ ] to start the stopwatch.
3. Press [ ] to measure sub-intervals.
4. Press <Reset> to erase the recorded times.
Timer
The Timer (Menu 7.8) allows you to count down from a preset time to zero.
A series of tones plays when the time reaches zero.
To start the timer:
1. From the Idle screen, press [ ] and select Tools → Timer.
2. Press <Set>.
3. Using the numeric keys, enter the number of hours, minutes and
seconds that you wish to count down then press <OK>.
4. Press [ ] to start the timer.
To pause the countdown, press [ ].
When the count reaches 0, an alarm sounds and Time Out displays on the
screen. Press <OK> to cancel the alarm and message.
