3
4
5
6
ENGLISH
Photo Mode : Setting Various Functions
6464
Setting the Light
The Light only works in Photo Mode and allows the user to take photos where there is
insufficient light.
1. Slide [Mode Selector] down to turn on the CAM and slide it down again.
◆ The Mode Selection screen appears.
2. Slide the [ ▲/▼] switch to select Photo mode and press the [OK] button.
◆ The Photo Capture screen appears.
3. Press the [Menu] button and slide the [ ▲/▼] switch.
Press the [OK] button after selecting <Settings>.
4. Slide the [ ▲/▼] switch to select <Light> and press the [OK] button.
5. Slide the [ ▲/▼] switch to select the desired setting and
press the [OK] button.
◆ Auto: Sets the light automatically.
◆ On( ): Turns on the light.
◆ Off( ): Turns off the light.
6. Press the [Menu] button to finish setting.
◆ The selected function icon is displayed.
Notes
✤
If you select <Back> in the menu, the previous menu appears.
✤
Press and hold the [Menu] button in Photo Capture mode, you can move to <Settings> directly.
✤
If the battery is low and the battery charge icon blinks, the light will not operate
and light icon is set to off state.
