111
•
Press
Menu
, then select
Delete
. You are prompted to confirm your
deletion.
•
To confirm the deletion, press
Yes
.
My Information Setting
This option lets you change your i225 Bluetooth device name.
1. At the Settings menu, select Connections ➔ Bluetooth
➔ My Information Setting. The My Information Setting
screen appears in the display showing the i225 current
Bluetooth Device name.
2. To change the name, highlight
Device name:
.
3. Use the keypad to edit the name or enter a new name.
4. To save your new setting, press
Save
.
Incoming Beam Setting
1. At the Settings menu, select Connections ➔ Bluetooth
➔ Incoming Beam Setting. The Incoming Beam Setting
screen appears in the display with the
Receive incoming
beams
checkbox highlighted.
2. Enable/disable this setting by pressing .
3. To save your new setting, press
Save
.
FTP Server Setting
1. At the Settings menu, select Connections ➔ Bluetooth
➔ FTP Server Setting. The FTP Server Setting screen
appears in the display showing the current Bluetooth and
OBEX FTP security settings and Shared Folder setting.
2. Enter or select values for each setting in turn.
•
Highlight each setting by pressing the Navigation key Up or Down.
•
Select values by pressing
.
3. To save your new settings, press
Save
.
Basic Printer Setting
Lets you connect your i225 with a Bluetooth printer already
paired with your i225 phone. (For more information, refer to
“General Settings” on page 110.)
If your printer includes Bluetooth Printing technology,
Basic
Printing
service appears in
Partnership Settings
. Check
Basic
Printing
and press
Done
.
You can set or unset a default Bluetooth printer in
Printer Basic
Settings
.
Smart Pairing Setting
Lets you select whether the i225 attempts to pair with other
Bluetooth devices using predefine or specified PIN codes.
1. At the Settings menu, select Connections ➔ Bluetooth
➔ Smart Pairing Setting. The Smart Pairing Setting
screen appears in the display showing the current Smart
Pairing settings.
2. Enter or select values for each setting in turn.
