Adjusting the Volume
During a call, if you want to adjust the voice volume,
use the volume keys on the left side of the phone.
Press to increase and to decrease the volume.
The illustration shows the volume level. The more bars
your see, the louder the volume is.
35
CCaallll FFuunnccttiioonnss
34
CCaallll FFuunnccttiioonnss
Voice Dialing
You can dial a phone number only by speaking a name.
Before using the Voice Dialing feature, you must
program your phone to recognize the name and
number by using the Voice Dial menu. For further
information, see page 83.
Note: The voice Dialing feature does not work when
your phone is in analog mode.
1. To place a call, press and hold or open the
phone, depending on the Set Active menu option
(MENU 6-1-4). See page 85.
2. At a voice prompt, say the name into the
microphone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
screen prompts for the name again.
• If the phone is unable to recognize the name after
two attempts, the message “Cannot Recognize
Name. Please check name” is displayed. Try the
call again later or check the recorded name.
3. The phone dials the corresponding number.
In standby mode, you can adjust the volume for the
call ringer volume using these keys.
