TAKING PHOTO IMAGES
O
o
1.
2.
3.
Set the Storage mode switch to CARD before recording on a memory card,
You can take photo images using the remote control. _*page 13 (SC-DX105 only)
Slide the POWER switch downwards to turn the DVD camcorder on.
o Set the Storage mode switch to CARD, _page 30
Check the subject on the LCD screen. (Lens and LCD)
o Set the Lens open/close switch to open (0). _page 10
Press the PHOTO button to take the picture.
• A shutter sound is heard. The photo image is recorded with the "Photo capture"
message appeared.
o While saving the photo image on the memory cards, you cannot proceed with taking
the next photo.
• You can use the zoom function while recording. _-,page 37
• The number of photo images that can be stored depends on the quality and size of
the image. _*page 55
- The photo image is taken only in the 4:3 aspect ratio on the memory card.
- Audio will not be recorded with the photo image on the memory card.
• Please check the protection tab setting on your memory card before recording.
You may not be able to record when it is locked,
. If focusing is difficult, use the manual focus function. _*page 70
• Do not operate the POWER switch or remove the memory card while accessing
the storage media, tt may damage the storage media or data.
. Photo images are actually wider than what appears on the LCD screen.
• The recorded photo image size is 800X600.
English _57
