7
Voice Recorder Mode
You can record voice using the built-in microphone in the CAM.
1. Slide [Mode Selector] down to turn on the CAM and slide it down again.
◆ The <Mode Selection> screen appears.
2. Slide the [▲/▼] switch to select Voice Recorder mode and press the [OK]
button.
3. Press the [Record/Stop] button to record voice.
◆ The elapsed time and <● REC > is displayed. The CAM starts recording.
4. Press the [Record/Stop] button to stop recording voice.
◆ < ■ STBY> is displayed and it stops recording.
You can hear the voice file connecting earphones.
1. Slide [Mode Selector] down to turn on the CAM and slide it down again.
◆ The <Mode Selection> screen appears.
2. Slide the [▲/▼] switch to select Voice Recorder mode and press the [OK]
button.
3. Press the [Menu] button when the <Voice Record> screen appears.
4. Slide the [
▲/▼] switch to select <Play> and press the [OK] button.
5. Slide the [▲/▼] switch to select the file you want to play.
6. Press the [OK] button to play the recorded voice.
◆ Press the [OK] button to pause playing.
Recording Voice
Playing Voice files
Note
✤
Press the [Back] button while recording standby status to view the file list.
Play/Pause [ ] button: Play or pause the voice file
Rewind [ ] switch: Rewind the voice file backward (Press and hold over 2 seconds)/Move to the previous file
Fast Forward [ ] switch: Wind the voice file forward (Press and hold over 2 seconds)/Move to the next file
The button and switch you use when playing the recording
2
3
4
Notes
✤
‘
----
’ is displayed depending on the title of MP3 file.
✤
If you slide the Hold switch to on, all buttons except the Power switch and volume +/- button are locked.
The MP3 hold switch operates only in the MP3 mode.
✤
In MP3 playback mode, a file name may not be displayed correctly or an MP3 file may not playback.
In this case, rename the file name using English alphabets only.
MP3 Mode
✤
Press the [▲] switch
First 2 seconds after start playing - the previous file appears.
2 seconds after start playing - the first scene of the file appears.
✤
Press the [▼] switch
The next file appears.
The use of
[ ▲/▼]
switch
