9
Follow these steps to use you travel adapter:
1. With the battery installed in the phone, plug the small
jack from the travel adapter into the connector at the
bottom end of the phone.
2. Plug the larger end of the adapter into a standard 120
VAC wall outlet. The battery begins charging
immediately and the LED on top of the phone turns red.
The LED indicates the charging status of the battery.
•Red indicates that the battery is charging.
•Green indicates that the battery is fully charged.
• You can make a phone call while the phone is plugged
into the travel adapter. The adapter continues to charge
the battery even when you are using the phone.
Tip: The battery charges faster if the phone is turned off.
Low battery indicator
The battery indicator ( ) in the upper-right corner of the
display screen indicates the battery power level. Three bars
indicate a full charge, while an empty battery icon indicates
your battery is almost empty.
The empty battery icon
Two to three minutes before the battery charge level becomes
too low to operate the phone, a blinking an empty battery icon
( ) appears in the display, and a tone sounds. If you
continue to operate the phone without charging the battery,
the phone shuts down. Be sure to monitor the battery
strength icon and ensure your battery is adequately charged.
