■
If you are using an off-air antenna that
has 300-ohm twin flat leads, use an
external antenna connector (300-75 ohm
adaptor : not supplied) to connect the
antenna to the HDD & DVD RECORDER.
■
If you have two separate antennas (one
VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most
electronics shops) to connect the antenna
to the HDD & DVD RECORDER.
■
The VHF/UHF RF OUT jack of this
product sends only signals received
through the antenna. It does not output
Audio/ video signals. You must connect
audio/video cables to view Video from the
unit. (i.e. DVD playback)
NOTE
English - 19
Connecting & Setting up
Step 1: Connecting the
Antenna Cable
There are several ways to connect your HDD & DVD
RECORDER. Select one of the following antenna
connections that best suits you below.
•
Method 1 : Antenna + HDD & DVD RECORDER + TV : No
Cable box
•
Method 2 : Antenna +Cable box + HDD & DVD RECORDER +
TV : Cable box with many scrambled channels
•
Method 3 : Antenna + HDD & DVD RECORDER + Cable box
+TV : Cable box with a few scrambled channels
Method 1 : Antenna + HDD & DVD
RECORDER + TV : No Cable box
You can record non-scrambled channels by selecting
the channel on the HDD & DVD RECORDER. Also
use this Method if you watch channels without cable
box.
To RF IN
To ANT INPUT
TV
To RF OUT
RF Cable
2-HR720_XAC_18-25_CONNECT 5/17/05 9:52 PM Page 19
