
Connecting to a power source
Connecting to a power source
You should use the rechargeable battery SLB-1137D supplied with the
camera. Be sure to charge the battery before using the camera.
SLB-1137D rechargeable battery Specifi cation
(When the camera is turned off)
Number of images and battery life : Using the SLB-1137D
Using the fully charged battery, Auto
mode, 8M image size, Fine image
quality, Shot to shot interval : 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the fl ash on every second shot.
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Using the fully charged battery 640x480
image size 30fps frame rate
Using the fully charged battery LCD Off.
Using the fully charged battery
These fi gures are measured under Samsung’s standard conditions and
shooting conditions and may vary depending on the user’s methods.
Important information about battery usage.
When the camera is not used, turn off the camera power.
Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to
leaking if kept inside the camera.
Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may
become warm. This is perfectly normal.
When you use earphones, do not remove the battery while the
camera is turning on. It may generate a loud noise.