Operating a TV with the Remote Control
•
The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
•
If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
When operating a TV with the remote control
1
Press TV button to select TV mode.
2
Press POWER button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down POWER, enter the code
corresponding to your brand of TV.
•
If the code matches the TV's code, the TV will be turned off.
•
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
•
You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
5
Point the remote control toward the TV
and press POWER. If the TV turns off or
on, the setting is complete.
Note
67
HT-Q20(41~70) GB 3/1/06 2:45 PM Page 66
