20 - English
Settings
4.
Select Wi-Fi Direct, and then press the
v
button.
The Wi-Fi Direct devices that you can connect
to appear.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Wi-Fi Direct
Device Name : HT-H5200
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX Not Connected
Close
Refresh
5.
You have three ways to complete the Wi-Fi
connection:
●
Through the Wi-Fi device.
●
Through the product using PBC.
●
Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
2.
When you have completed the procedure, you
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Select OK, and then
press the
v
button to accept.
3.
The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
●
The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1.
Select the Wi-Fi Direct device you want to
connect to this product, and then press the
v
button.
2.
The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
Through the Product Using a PIN
1.
Select the Wi-Fi Direct device you want to
connect to this product, and then press the
v
button.
2.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4.
The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
✎
The current wired or wireless network
connection will be disconnected when you use
the Wi-Fi Direct function.
✎
Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the
Wi-Fi Direct
function.
Upgrading Software
The Software Upgrade menu allows you to
upgrade the product’s software for performance
improvements or additional services.
●
Never turn the product off or back on manually
during the update process.
●
The update is complete when the product turns
off after restarting. Press the POWER button to
turn on the updated product for your use.
●
Samsung Electronics takes no legal
responsibility for product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
upgrade.
1.
In the Home menu, select Settings, and then
press the
v
button.
2.
Select Support, and then press the
v
button.
3.
Select Software Upgrade, and then press the
v
button.
