English - 77
Choosing a Digital Sound Format
Digital sound can be output from the rear-panel connector on your TV. The digital sound
output is an optical connector labeled “Optical Out”. After connecting an optical digital-audio
component, you must specify the transmission format (Dolby or PCM, as appropriate to your
digital audio component). See the owner's manual of your Digital Audio component for further
information.
1
Press the MENU button.
Press the … or † button to
select “Sound”, then press
the ENTER button.
2
Press the … or † button to
select “Digital Output”, then
press the ENTER button.
Press the … or † button to
select “Dolby Digital” or
“PCM”, then press the
ENTER button.
Press the EXIT button to exit.
Sound
Mode : Custom
√
Equalizer
√
DNSe : Off
√
Multi-Track Options
√
Auto Volume : Off
√
Internal Mute : Off
√
Digital Output :
Dolby Digital
√
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Sound
Mode : Custom
Equalizer
DNSe : Off
Multi-Track Options
Auto Volume : Off
Internal Mute : Off
Digital Output :
Dolby Digital
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Dolby Digital
PCM
Digital
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
BP68-00546A-01(072~081) 9/28/05 12:58 PM Page 77
