›
Receive data using the Bluetooth wireless
feature
In Idle mode, open the application list and select
1
Settings
→
Wireless and networks
→
Bluetooth settings
→
Discoverable.
Your device is visible to other Bluetooth devices for
120 seconds.
When prompted, enter the PIN for the Bluetooth wireless
2
feature and select OK. Alternatively, select Accept to
match the PIN between your device and the device.
Select
3
Accept to confirm that you are willing to receive
data from the device.
Received data is saved to the bluetooth folder. If you receive a
contact, it is automatically saved to the phonebook.
Wi-Fi
Learn to use your device’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses a non-harmonised frequency and is
intended for use in all European countries. The WLAN
can be operated in the EU without restriction indoors,
but cannot be operated outdoors in France.
