Section 10: WAP 100
3.
Select the profile you want.
For each profile, the following options are available:
• Profile Name: enter a name that you wish to assign to the HTTP proxy server.
• Home URL: set the address of your startup homepage. When the default
homepage displays, you can delete it using the
key and enter your own
choice.
• Proxy: place a check in the box to use the proxy server.
• IP Address: enter the IP address of the proxy server.
• Port: enter a port number or use default setting.
• DNS
DNS1: enter the primary DNS (Domain Name System) address.
DNS2: enter the secondary DNS address.
• Bearer: select the bearer to be used for each type of network address accessed:
GPRS or GSM. The remaining options depend on the Bearer setting.
When the bearer is set to GPRS:
• APN: enter the access point name used for the address of the GPRS network
gateway.
• Login ID: enter the User ID required to connect to the GPRS network.
• Password: enter the password required to connect to the GPRS network.
When the bearer is set to GSM:
• Dial Number: enter the PPP server phone number
• Login ID: enter the PPP server login ID.
• Password: enter the PPP server password.
• Data Call Type: select a data call type: Analog or ISDN.
Note: The WAP settings may vary depending on the service provider.
