A SERVICE OF

logo

Open as PDF
next previous
287
Contents
Chapter Contents
Whitedotsorsimilarimageartifactsappearinashshots.
• Thisiscausedbylightfromtheashreectingoffdustorairborne
particles.
Shotslookgrainy.
• Lower the ISO speed (=
124).
Subjectsareaffectedbyred-eye(=
8 7 ).
• Set [Red-Eye Lamp] to [On] (=
94) to activate the red-eye reduction
lamp (=
5)inashshots.Notethatwhilethered-eyereductionlamp
is on (for about one second), it is not possible to shoot, because the lamp
is counteracting red-eye. For best results, have subjects look at the red-
eye reduction lamp. Also try increasing the lighting in indoor scenes and
shooting at closer range.
• Edit images using red-eye correction (=
184).
Recordingtothememorycardtakestoolong,orcontinuous
shootingisslower.
• Use the camera to perform low-level formatting of the memory card
(=
251).
ShootingsettingsorFUNC.menusettingsarenotavailable.
• Available setting items vary by shooting mode. Refer to “Functions
Available in Each Shooting Mode”, “FUNC. Menu”, and “Shooting Menu”
(=
301 – 310).
Shooting Movies
Theelapsedtimeshownisincorrect,orrecordingis
interrupted.
•
Use the camera to format the memory card, or switch to a card that
supports high-speed recording. Note that even if the elapsed time display
is incorrect, the length of movies on the memory card corresponds to the
actual recording time (
=
250, 322
).