36
- English
System Setup
You can enjoy high quality image through RGB or
Component video connections.
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
2
Press the …† buttons to select Setup, then
press the OK or √ button.
3
Press the …† buttons to select Video, then
press the OK or √ button.
Video setup menu will be displayed.
4
Press the …† buttons to select Video
Output, then press the OK or √ button.
5
Press the …† buttons to select the desired
item, then press the OK or √ button.
In Component mode, you can set video output to
Progressive(P.SCAN) or Interlace, see page 37.
Available video output jacks are as follow.
Available Video Output Jack
Setting up Video Output
Options
RETURNOKMOVE EXIT
Setup
No Disc
System
√√
Clock Set
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
Install
√√
Programme
Setup
RETURNOKMOVE EXIT
Timer Record
No Disc
Video Plus+
√√
Timer Record
√√
Video Plus+ Extended : Off
√√
Programme
Setup
RETURNOKMOVE EXIT
Video
No Disc
TV Aspect : 16:9 Wide
√√
3D Noise Reduction : Off
√√
Video Output
:
Component
√√
Programme
Setup
RETURNOKMOVE EXIT
Video
No Disc
TV Aspect : 16:9 Wide
√√
3D Noise Reduction : Off
√√
Video Output
:
Component
√√
Programme
Setup
Component
RGB
Component Select this when the Recorder is connected
to a TV with Component jack.
RGB Select this when the Recorder is connected
to your TV using SCART cable.
Component Output
(Y, Pb, Pr)
AV1 Scart
R, G, B
Composite
X
O
X
O
O
O
O
(TV in progressive mode)
X
X
X
X
X
O
X
O
O
O
O
AV2 Scart
Composite Video out
S-Video out
(Composite)
Setting mode
RGB Mode
Output jack
P.SCAN off mode (Interlace mode)
P.SCAN on mode
Component mode
1-00687A-R120-UK_19~42 3/10/05 5:19 PM Page 36
