Input - Source List (depending on the model)
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
➢
Press the SOURCE
button on the remote control repeatedly to select the
desired signal source.
Setup - Plug & Play (depending on the model)
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
1 Press the POWER button on
the remote control.
The message “Start Plug
& Play” is displayed. It
flickers for a little while and
then Language menu is
automatically displayed.
2 Press the ▲ or ▼ button to
select the language, then
press the ENTER button. The
message “Check antenna
input” is displayed.
➢
If any language is not
selected, the language
menu will disappear
about 30 seconds later.
3 Make sure that the antenna
is connected to the TV.
Press the ENTER button,
then the “Auto Program” is
displayed.
4 Press the ENTER button to
select “Start”. The TV will
begin memorizing all of the
available channels. Press the
ENTER button to stop.
continued...
5 After all available channels
are stored, the “Clock set”
is displayed. Press the
ENTER button. Press the
◄ or ► button to move to
the hour or minute. Set the
clock by pressing the ▲ or
▼ button.
6 When you have finished,
press the MENU button.
The “Enjoy your watching.”
is displayed and then the
channel which has been
stored will be activated.
➢
Plug & Play feature
doesn’t work in the
AV mode, and then the
channel which has been
stored will be activated.
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play)
ENTER
Plug & Play
Enter Exit
OK
Start Plug & Play.
Plug & Play
Enter Skip
Auto Program
Air 3
3%
Stop
Enjoy your watching.
OK
Move
Enter Return
Source List
TV
AV1
AV2
Component
Plug & Play
Enter Skip
OK
Check antenna input.
Plug & Play
Move
Enter
Adjust
Skip
Clock Set 12 : 00 am
Move
Enter Return
Setup
Plug & Play ►
Language : English ►
Time ►
Caption : Off ►
Child Lock ►
Blue Screen : On ►
Plug & Play
Move
Enter Skip
Language
English
Español
Português
Français
Plug & Play
Enter Skip
Auto Program
0%
Start
AA68-03992K-Eng.indd 3 2009-03-04 오전 11:05:55
