Remove the battery cover on
the back of the remote by
pressing down and sliding the
cover in the direction of the
arrow.
Insert Remote Batteries
Range of Operation of the Remote Control
1
Insert two 1.5V AAA batteries,
paying attention to the correct
polarities (+ and –).
2
Replace the battery cover.
3
The remote control can be used up to
approximately 23 feet/7 meters in a straight line.
It can also be operated at a horizontal angle of
up to 30° from the remote control sensor.
Follow these precautions to avoid leaking or cracking cells:
•
Place batteries in the remote control so they match the
polarity:(+) to (+)and (–)to (–).
•
Use the correct type of batteries.Batteries that look similar
may differ in voltage.
•
Always replace both batteries at the same time.
•
Do not expose batteries to heat or flame.
CAUTION
To open the remote control
cover, push the top of the
cover, then slide downward.
Clear button
Step button
Program button
Remain button
Sound Edit button
SPK Mode button
Pro Logic II button
Test Tone button
Slow button
Angle button
Repeat button
P.Scan button
Repeat A↔B button
Zoom button
Setup/P.Scan Adjust button
D.R.C button
Number(0~9) buttons