Sharing a single CAM6.6T (internal tuner) with multiple
controllers
This arrangement can support up to six CAM6.6 units
for up to 36 zones/6 sources. Each additional
CAM6.6 must have an incremental Controller ID # and
RNET link. Audio from the source tuner can be split if
shared by all controllers.
CAM6.6T -
Controller Setup Menu: Controller ID = 1
Peripheral Setup Menu: Controller ID = All Controllers
Output/Input Switch = Internal Source Output
RCA cable connected to Source 1
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner;
Command Type = Peripheral
Output/Input Switch = Input
RCA cable connected to Source 1
SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH ONE TUNER
109
