OPERATING INSTRUCTIONS
14
Vista L-Series Installation and Operations Manual
Operating instructions
The Vista switch is very easy to operate. Computer selection and set-up
functions are entered from the keyboard. You can also select computers
manually from the Vista’s front panel by using buttons 1-4 or buttons 1-8
depending on your model. The Vista models with the on-screen display
(OSD) option can select computers by choosing from an on-screen list of
the computers.
Keyboard command
Following is a description of the Vista keyboard command functions.
The <Ctrl> input is a press and release of the left control key. Within
2 seconds of pressing and releasing the left <Ctrl> key, enter the next
command.
Invoke the On
Screen Display
Displays the on-screen display
for models with this option
Provides a list of connected
computers to connect to
command
and keyboard, enables PS/2
mouse on currently selected
command
Sends reset mouse command
to currently selected CPU. Will
Used to re-synchronize PS/2
mouse.
version
Identifies ROM version, CPU
must be at a command prompt,
word processor, or text editor to
Saves current scan state and
custom settings.
<Ctrl> Txx <Enter>
(xx = 1 – 16 sec.)
Sets the pause time for each
port when scanning.
