ULTRAVIEW REMOTE 2 INSTALLATION AND OPERATIONS MANUAL
35
Keyboard Commands
Keyboard commands can be used to further customize the KVM switch module. These commands can be invoked
directly from a local or remote keyboard or from the “Command, Keyboard commands” tab on the VNC view toolbar.
(To use the keyboard commands, you must be connected via the VNC viewer, not the java applet)
The commands listed in the “Key sequence” column are direct keyboard commands, those in the “HotKey
Command” column are the key sequence string to add the “Command, Keyboard Command” tab on the VNC
viewer’s toolbar.
<Ctrl> nnn where nnn
= computer number
Connects the KVM station to
the selected computer.
+-ctrl+-nnn
Selects next sequential CPU
Selects previous sequential
CPU.
+-ctrl+--
Disconnects from currently
connected computer.
+-ctrl+-l
where nn = mode
Alternate way to configure
keyboard and mouse. N/A
where n = resolution
Alternate way to set screen
resolution when no video is
N/A
<Ctrl> Vnnn <Enter>
where n = 0 –999 sec.
Alternate way to set screen
saver time.
N/A
Used to re-sync a PS/2
mouse.
+-ctrl+-n
command
and keyboard on currently
+-ctrl+-r
Total ports used (all units)
Number of expansion units.
Number of ports on
expansion units.
N/A
