18
CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL
Dual, PC - Serial/Audio model specific notes
n Right control key = key to send commands to the CrystalView,
changeable by SW1, position 2.
n Console lockout period is fixed at 2 seconds.
n Console switching is by pressing any key on the keyboard or by
any mouse movement. The first keyboard entry or mouse
movement is ignored.
n Monitor will always be blanked during private mode.
n All audio transmission is stopped in private mode.
n The serial link is always active regardless of mode.
All model specific notes
The Hub's LED will be steadily lit if the port is powered. The LED
will flash if it is communicating with a Remote Unit. The LED will
stop flashing if the remote unit is disconnected, powered down, or at
any time local access to the unit is active (dual access models only).
