27
Connecting external devices
Connecting to audio
equipment
You can connect audio devices to play the sound of the
ep-760 through the speakers of your audio system, or to
record your performance on a tape recorder or other record-
ing device.
When connecting, please use an audio cable with a standard
phone plug (sold separately).
Connection examples
NOTE
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing the sound of the ep-760 through the
speakers of an audio system/Recording the
performance of the ep-760 on a recording device
Use the following procedure when turning on the
power:
A Turn on the power of the ep-760.
B Turn on the power of the connected device.
C Adjust the volume of each device.
When recording ep-760 performances with a cassette
deck, etc.
D Start recording on the connected device.
E Perform on the ep-760.
F When the performance ends, stop recording on the
connected equipment.
Playing the sound of an audio device through the
speakers of the ep-760
Use the following procedure when turning on the
power.
A Turn on the power of the connected device.
B Turn on the power of the ep-760.
C Adjust the volume of each device.
Turning off the power
A Set the volume of the ep-760 and of the connected
devices to the minimum position.
B Turn off the power to the ep-760.
C Turn off the connected equipment.
Connecting to a computer
You can use a USB MIDI interface cable (sold sepa-
rately) to connect the ep-760 to your computer.
If the ep-760 is connected to a computer running
sequencer software such as Roland’s “Visual MT”, a
song you’ve recorded on the ep-760 can be saved on
your computer.
Connection examples
NOTE
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
• In order to make connections to your computer, you must
install MIDI driver software on your computer. For details, refer
to the owner’s manual for your MIDI interface.
Use a USB MIDI interface cable to connect the USB con-
nector of your computer to the MIDI connectors of the
ep-760.
6. Connecting external devices
Input R/L
(Line In, Aux In)
ep-760
Output R/L
(Line Out, Aux Out)
ep-760
MIDI IN
MIDI OUT
USB Connector
of your Computer
USB on your
computer
Computer
UM-1, etc.
ep-760
ep-760.GB Page 27 Thursday, May 16, 2002 8:03 PM
