17
Reference
Specifications
● System
2 Way Bi-Amplified Monitor
● Enclosure
Bass-reflex type
● Cabinet
1/2” MDF, Baffle: 3/4” MDF
● LF Driver
120 mm (5”) Foamed polypropylene cone type, magnetically
shielded
● HF Driver
19 mm (3/4”) soft dome type, magnetically shielded
● Frequency Response
68 Hz to 22 kHz (+/-3 dB)
● Crossover Frequency
2.3 kHz (active third order)
● LF Amplifier Power
30 W
● HF Amplifier Power
20 W
◆◆◆◆◆ Analog in ◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
● Input Sensitivity
0 dBu (0.775 Vrms)
● Input Impedance
20 k ohms (Balanced/Unbalanced)
◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
◆◆◆◆◆ Digital in ◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
● Format
Conformity with S/P DIF
● Sample Rate
32 kHz to 96 kHz (de-emphasis: OFF)
● D/A Converter
24-bit
◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
● Controls
LEVEL Knob
LF TRIM Knob (80 Hz, +/-3 dB)
HF TRIM Knob (10 kHz, +/-3 dB)
INPUT SELECT SW (Analog In/Digital In)
ASSIGN SW (Right/L+R/Left)
DIGITAL INPUT SELECT SW (Optical/Coaxial)
POWER SW
● Indicators
POWER
DIGITAL IN
● Connectors
ANALOG INPUT (XLR/TRS PHONE, Balanced/
Unbalanced)
DIGITAL INPUT (Optical)
DIGITAL INPUT (Coaxial)
DIGITAL THRU OUT (Coaxial)
● Power Supply
AC117 V, AC230 V or AC240 V
● Power Consumption
50 W
● Dimensions
197 (W) x 267 (D) x 312 (H) mm
7-3/4 (W) x 10-1/2 (D) x 12-1/4 (H) inches
● Weight
8 kg / 17 lbs. 11 oz.
● Accessories
Owner’s Manual
Power Cord
* In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior
notice.
Application of AC230 V
Power Cord
for UK
except for UK
