80
Making Settings and Edits for Individual Cards
Card Conversion Chart/Conversion Error Chart
fig.12-01e
1 Phrase Information
●1.1 Playback Volume (10%--100%)
●1.2 Delay Time (00s00f–59s29f)
●1.3 Playback Point
●1.4 Repeat Play
❍
◆ Conversion of frames to seconds
▲ Error when playback point is set
OFF
ON
Repeat (1–99)
Repeat Interval (00m00s–59m59s)
❍
❍
✕
❍
●1.5 Loop Play
●1.6 Fade
●1.7 Control Out
✕ Disabled
✕ Disabled
OFF
ON
Offset Time (00m00s–59m59s)
❍
❍
❍
●1.8 MIDI Playback Tempo (5–260)
●1.9 Phrase Name
❍
◆ Up to 11 characters
4 Settings for Card Editing
●4.1 Card Format
Select Max Phrases
250
500
1000
●4.5 Card Protect
OFF
ON
●4.6 Card Name ❍
❍
◆
Recording Phrase Protection
❍
❍
▲
5 Settings for Control Input
●5.1 Control Input Mode
DIRECT PLAY
PROGRAM PLAY
BINARY PLAY
BINARY REC
●5.2 Direct Play
Normal
First-In
Last-In
Sequence
Phrase assignment (1–16)
Assigned phrase
(PLAY,-----,A0001–B1000)
●5.3 Program Play
Program (1–5)
Played back in order
Assigned phrase (A0001–B1000)
●5.4 Binary Play
<Level: Edge>
OFF: OFF
ON: OFF
OFF: ON
ON: ON
●5.5 Binary Recording
Phrase select
BINARY1
BINARY2
✕ Disabled
✕ Disabled
◆ Trigger Mode: Level
❍ Trigger Mode: Level
❍ Trigger Mode: Edge
◆ Trigger Mode: Level
❍
❍
❍
Valid for No. 001 through 500
▲ Error when 501 or more are present
❍
◆
Normal
❍
❍
❍
❍
Valid for No. 001 through 500
▲ Error when 501 or more are present
❍
❍
❍
◆
BINARY1
2 Phrase Combination
●2.1 Pattern Phrase ▲ Error when pattern phrase is assigned
to pattern phrase
Pattern Phrase Modes
SEQUENTIAL
RANDOM1
RANDOM2
RANDOM3
Interrupt phrase interval (1–25)
Playback sequence (No.001–128)
Assigned phrase (A0001–B1000)
Volume (10%–100%)
Interval (00.0s–59.9s)
●2.2 Song phrase ▲ Error when song phrase is present
❍
◆
RANDOM
◆ RANDOM
◆ RANDOM
✕ Disabled
◆ Valid for No. 001 through 100
❍ Valid for No. 001 through 500
▲ Error when 501 or more are present
✕ Disabled
❍
State of recording settings
●REC-In (Selecting the Recording Connector)
LINE-IN
LINE+MIC-IN
DIGITAL-IN
MIDI-IN
◆ MIDI Rec: OFF
◆ MIDI Rec: OFF
◆ MIDI Rec: OFF
◆ MIDI Rec: ON
●RDAC-Grade
ANNOUNCE
LONG2
LONG1
STANDARD
HIGH
S-HIGH
❍
❍
❍
❍
❍
◆
HIGH
●RDAC-Mode
MODE1
MODE2
MODE3
LINEAR
H-LINEAR
❍
❍
◆
MODE2
◆ MODE2
◆ MODE2
●REC Type
STEREO
MONO
❍
❍
●Trig Level (Trigger Recording Settings)
OFF
LOW
MID
HIGH
❍
❍
❍
❍
●MIDI Time Base
192
240
❍
❍
●RDAC-Grade
●RDAC-Mode
●REC Type
●MIDI Time Base
Recording settings for recorded phrased
❍
❍
❍
❍
❍
▲
❍
❍
▲
❍
▲
ANNOUNCE
LONG2
LONG1
STANDARD
HIGH
S-HIGH
MODE1
MODE2
MODE3
LINEAR
H-LINEAR
192
240
❍
❍
STEREO
MONO
❍
❍
* This chart shows compatibility for converted cards used on the AR-2000.
When you're using on the AR-100 or AR-1, refer to the owner's manual for
the respective device.
Card Conversion (AR-3000→AR-2000)Chart
❍ Effective without change
◆ Converted to similar values
✕ Not valid
▲ Result in an error and halt conversion
AR-3000R_e.book 80 ページ ２０１０年３月１８日 木曜日 午後２時６分
